DMT 40169, Руководство пользователя

Страница: 10 / 20

8
Additional Features
• 3-pin and 5-pin DMX connections on base and platform
• 5 RCA in/out connections capable of up to a 720p signal (individually grounded)
• 1 XLR in/out connection
• DMX pass-through to platform when power is on/off
• IEC and Edison power connectors on platform
• Convenient ¼”-turn fasteners
• Multiple mounting options: Platform plate with mounting slots
Dual mounting brackets
• Built-in automatic programs via master/slave
• Automatic pan correction
• Micro-stepping motors
• LED display
• 16-bit pan resolution
• Isolated fuses for base and platform
• Fan cooled
Channel Function
1 Pan
2 Fine Pan
3 Vector Speed
4 Platform Power
Installation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
Always disconnect from electric mains power supply before cleaning.
Damages caused by non-observance are not subject to warranty.
Set Up and Operation
Follow the directions below, as they pertain to your preferred operation mode.
Before plugging the unit in, always make sure that the power supply matches the product specification
voltage. Do not attempt to operate a 120V specification product on 230V power, or vice versa.
One Media Spinner
1. Fasten the effect light onto firm trussing (Use a proper clamp fastened onto the Media Spinner ).
Leave at least 1 meter on all sides for air circulation.
2. Plug one end of the electric mains power cord into the IEC socket on the unit .
Then plug the other end of the cord into a proper electric power supply socket.
3. Use a 3-p XLR cable to connect the Media Spinner and other devices.
4. Always use a safety cable.