DMR SEC+, Руководство пользователя

Страница: 3 / 11

SECT BIKE TECHNICAL INFORMATION
3
ASSEMBLY OF THE NEW BICYCLE
Your Sect complete is supplied partial-
ly assembled. It is important that you
follow the instructions on the next page
or bring your bike to a local bike shop
for setup.
FIRST RIDE TIPS
:
• Allow a relaxed first ride as the brakes
may take a few uses to wear in and op-
erate at full power. Adjust accordingly.
• Your chain may stratch in the first few
rides and require adjustment to keep it
tight. Please follow instructions on the
following pages for adjustment tips.
TOOLS REQUIRED
• 2mm, 4 mm, 5 mm, 6 mm allen keys
• 8 mm, 15 mm open end wrench
• Philips head screwdriver
• Torque wrench
REPLACEMENT PARTS
• Tektro Brake pads: E10.11
• 26” x 1.9-2.4 inner tubes (Schrader/
presta)
TORQUE SETTINGS
Please make sure you check that all
the following parts are torqued to the
correct Nm.
Table 1.
1
• Steerer clamp - 14 Nm
2 • Bar Clamp bolts - 6Nm
3 • Brake Mounting bolts - 6Nm
4 • Seat Clamp bolt - 10Nm
5
• Wheel nuts - 30Nm
6
• Pedals - 30-34Nm
7 • Crank pinch bolts - 12-14Nm
1
2
3
4
5
6
7
5