¾
Figure 12 contact setting table
¾
List of receive groups:
The list of receiving groups, as its name implies, is the
list set by the receiver for group call, and the call and
full call are not in this list. Multiple or one group can be
integrated into a receiving group. As shown in figure 13.
Figure 13 list setting of receive group
Digital service:
There are two sets of basic parameters and contacts
in the digital service project. "Basic parameters" mainly
refers to some parameters settings of the machine, in
which the "native ID" number is the only identification
code of the customer in the communication group, and
must ensure that the other members of the communication
group ID is different, otherwise the same ID number
members can not realize interoperability. As shown in
figure 11.
Figure 11 configuration of basic parameters
The "contact" configuration is shown in figure 12. Call
alias, call type, call ID and so on. There are more than
one call and group call at the same time. "Full call" can
only be set one, and the number of ID is 16777215.
-8-
%$6,&23(5$7,216
¾
Scan list:
Figure 14 settings of scan list
"Scan list" sets the channel needed to scan in the scan mode.
The group members are added to the scan channel, "move up"
and "move down" to adjust the scan order.
WORK MODE
The handheld supports conventional mode and cluster mode.
The working mode needs to be configured by the upper computer.
Cluster mode:
in this mode, the interphone registers in the system.
Realize voice and data group call, call, cross regional call, scheduling
calls and other functions.
Conventional mode:
in this mode, the mode of work is digital
communication and analog communication. Digital communication:
support call, group call, short message and other functions.
Analog communication: has the conventional function of analog
walkie talkie, can communicate with other analog walkie talkie.
%$6,&23(5$7,216
-9-
