DMP Electronics Thinline 7360, Инструкция по установке и программированию

Страница: 14 / 24

10 7360/7363 Installation and Programming Guide | Digital Monitoring Products, Inc.
Installer Options Menu
All models provide a Keypad Option and Diagnostic menu to allow installing and service
technicians to configure and test keypad operation. Since all 7300 Series keypads operate
together on the Keypad bus using the same address, there is no address option to set.
Accessing Installer Options
The Installer Options Menu can only be accessed from the User Options menu while
displaying the Software Version or Model Number. When either is displayed, enter the
code 3577 (INST) and press CMD.
Programming Keypad Options
This menu allows the top row Select keys to be enabled as 2-button Panic keys and sets
the number of digits for user codes in the system.
Panic Keys (P 0)
Use this option to configure the top two left Select keys as 2-button Panic
keys. The display shows the current panic setting. The far left position displays
P
(Panic) and the far right position displays the panic key setting. To enable
the panic key operation press the number one key. This toggles between one
( 1 ) and zero ( 0 ) on the display. Zero ( 0 ) disables this option. The default is 0 .