DMP Electronics 734B, Инструкция по установке и программированию

Страница: 5 / 36

Digital Monitoring Products, Inc. | 734B Installation and Programming Guide 1
Annunciators
An onboard programmable piezo provides
local annunciation at the 734B. You can
also connect a variety of switched ground
annunciators to the 734B for remote
annunciation.
Indicator LEDs
The 734B provides three indicator LEDs.
The red LED turns on for the same
duration as the door strike relay. The
yellow LED turns on for one second to
indicate receipt of a valid input. The green
LED indicates that data is being sent to
the panel.
The 734B Access Control Module allows you to use the powerful built‑in access control
capability of DMP Panels. The module is designed specifically to support BIN tables for
the banking industry. For example, use the 734B to control access to ATM vestibules with
magstripe readers.
Connect a 734B to a DMP panel’s Keypad Bus or AX‑Bus to use the powerful built‑in
access control capability of DMP panels or install the module as a standalone access
control device. The 734B includes the following features:
Power Supply
The 734B operates at 12/24 VDC from
the power supply supporting a door’s
magnetic lock or door‑strike.
Warning: To avoid the risk of
equipment damage, do not exceed
750 mA total output current for zones
connected to the module.
Zone Terminals
Zones 1, 2, and 3 on the 734B can be
programmed for a variety of burglary or
access control applications.
ABOUT THE 734B