DMI TURBO-TIGER, Руководство оператора

Страница: 11 / 56

ADJUSTING & OPERATING
Once the Turbo-Tiger shanks are at the desired depth, as described on page 2, the machine must be leveled. A low front end will
cause excessive disc depth and possible structural damage. With the shanks in the soil, measure distance “A” and “B” (Fig #2) from
level ground to the arrow on the decals – THIS DISTANCE MUST BE THE SAME. Once this distance is obtained, step back
approximately 50 feet and view the machine. The Turbo-Tiger should appear level to the ground, if not, make certain the ground is
level under the decals. The Turbo-Tiger can be leveled by changing the position of the hitch clevis, which has an adjustment range
of 13-1/2” (Fig #3).
8 turbo-tiger® – 04 – DMI 10/04