DMF RW-1016, Руководство по запчастям и обслуживанию

Страница: 64 / 110

DIVERSIFIED METAL FABRICATORS, INC. RW-1016
© 2017 DMF, Inc. All Rights Reserved. 6-2
6.1 BEFORE ORDERING PARTS
6.1.1 Serial Numbers and Locations
To ensure parts order accuracy, DMF requires serial number information from your Railgear
assemblies. If you are placing a parts order through a maintenance facility, please inform them
of the serial numbers, so they can be communicated with your orders. Serial numbers uniquely
identify your Railgear, as it was built to your specifications, and also allows DMF to help you
maintain an order and repair history. DMF normally assigns serial numbers sequentially. The
front railgear assembly typically has a lower serial number than the rear.
Figure 6.1.1 RW-1016 Typical Serial Number Locations
6.1.2 Common Terminology
RW-1016 Railgear assemblies share many components between the front and rear assemblies.
The following terminologies are used to describe many shared parts and assemblies:
 “SIDE A” (without cylinder)
o
Driver side on front assemblies; Passenger side on rear assemblies.
 “SIDE B” (with cylinder)
o
Passenger side on front assemblies; Driver side on rear assemblies.
6.1.3 Custom Applications
If your Railgear was built for a non-standard rail gauge or using special wheel profiles (this is
especially prevalent on transit systems), please inform the DMF Parts Department when
ordering. Part numbers for these custom applications
are not included in the following
diagrams. Many components for custom applications are visually similar to the standard
components shown here, but
are not interchangeable.
6.1.4 Returns
DMF has a Return Authorization Procedure. You must contact DMF for an RA# before returning
any parts for any reason. Parts will not be credited without an RA#.
6.1.5 Labor
In extremely rare situations, on a discretionary basis, and with prior approval, DMF will
reimburse certain, specific labor costs. If you feel this may apply in your situation, you must
contact DMF’s Service Department for a Service Authorization Number (SA#). No labor will be
reimbursed without an SA#. The SA# must be included on your request for reimbursement.