HX33-DS Rev. A
Page 14 / 23
7
Tooling
DANGER
+
Due to the risk of hand or finger injury, never try to reach into the machine before having
assured that the machine is disconnected from the air supply. Disconnect the air supply
before changing the safety guard and the dies.
CAUTION
+
The pneumatic crimp machine HX33 may only be set up and operated in perfect technical
condition, observing all the safety regulations and considering any possible dangers.
+
The crimp machine is only allowed to be used with mounted dies and safety guard.
+
When working with the HX33 pneumatic crimp machine, do not wear loose clothing,
jewellery or long, loose hair that can get caught in the HX33 pneumatic crimp machine.
+
Work with caution.
+
Only one person is allowed to work on or with the machine at a time.
+
Only trained personal are allowed to work on or with the machine.
+
Assure free access to the operating elements of the machine, especially the foot pedal.
+
It is only allowed to work with the specified air pressure.
1. Disconnect pneumatic supply.
2. Remove the safety guard
1
.
3. Remove special screws of die set
2
.
4. Slide the upper and lower die in the
adapter and tighten the screws.
5. Install the safety guard
1
and tighten the
screws.
INFORMATION
+
Control the right position of the die halves! The size of the profile should be in line!
2
1
Fig. 7.1
