HPU13M Battery-powered Pump
HPU13M-DS REV. A ©2014 DANIELS MANUFACTURING CORP.
ALL RIGHTS RESERVED
526 Thorpe Rd. • Orlando, FL 32824 USA • 407-855-6161
www.dmctools.com
5
IMPORTANT SAFETY INFORMATION
Cutting hazard:
• Remove battery before changing dies,
adapters, or jaws.
• Keep hands away from the head when
in operation.
Failure to observe these warnings could
result in severe injury or death.
Do not dispose of batteries in a fire. They will vent fumes
and may explode.
Failure to observe this warning could result in severe
injury from harmful fumes or burns from flying debris.
Inspect tool and blades before use. Replace any worn or
damaged parts. A damaged or improperly assembled tool
can break and strike nearby personnel.
Failure to observe this warning could result in severe injury
or death.
• Do not use this tool for continuous use. After 100
cycles, allow the tool to cool for 15 minutes.
• Do not secure this tool in a vise.
• This tool may be used in damp or wet environments;
however, air-drying is recommended before use if the
tool becomes soaked. Damage may result when the tool
is operated prior to thorough drying when electrical
components are soaked.
• Use this tool for the manufacturer’s intended purpose
only.
Failure to observe these precautions may result in injury
or property damage.
Do not allow anything to contact the battery terminals.
• Do not immerse the batteries in liquid. Liquid may
create a short circuit and damage the battery. If batter-
ies are immersed, contact your service center for proper
handling.
• Do not place the battery into a pocket, tool pouch, or
tool box with conductive objects. Conductive objects
may create a short circuit and damage the battery.
• Do not place a battery on moist ground or grass.
Moisture may create a short circuit and damage the
battery.
Failure to observe these precautions may result in injury
or property damage.
• Do not store the battery at more than 122 °F (50 °C)
or less than –4 °F (–20 °C). Damage to the battery can
result.
• Do not use another manufacturer’s charger. Other
manufacturers’ chargers may overcharge and damage
the battery.
• Do not attempt to open the battery. It contains no user-
serviceable parts.
Failure to observe these precautions may result in injury
or property damage.
Use all appropriate and applicable personal safety equip-
ment as required such as safety shoes, hard hat, and safety
glasses. Follow all safety rules and regulations for the job.
Failure to comply may result in personal injury or property
damage.
Do not perform any service or maintenance other than as
described in this manual. Injury or damage to the tool may
result.
Failure to observe this precaution may result in injury and
property damage.
Note: Keep all decals clean and legible, and replace when
necessary.
