background image

- 22 -

LIMITED WARRANTY FOR

ECO SPAS

DM Industries, Ltd.

2 3 2 0   N W   1 4 7 t h   S t r e e t ,   M i a m i ,   F l o r i d a   3 3 0 5 4

WARR-ECO05-0117

DM Industries, Ltd., extends this limited warranty solely to the original

Purchaser of any Eco Spa purchased within the United States or

Canada.

5 YEAR STRUCTURAL 

SPA SHELL: DM Industries, Ltd., warrants its shells against loss of

water due to defects in materials and workmanship for five (5) years

from the original date of purchase.

2 YEARS SURFACE

The surface is warranted against blistering, cracking and chipping

resulting from a defect in the surface material for a period of two (2)

years from the original date of purchase.

COMPONENT WARRANTY

DM Industries, Ltd., warrants all factory installed electrical compo-

nents– pumps, blowers, and control system – and plumbing compo-

nents – jets, controllers, and air injectors,– to be free from defects in

materials and workmanship for a period of one (1) year from the orig-

inal date of purchase. The plumbing infrastructure, such as glued

joints, pipes and hoses are also warranted to be free from defects in

material and workmanship for a period of one (1) year.

Wearable components such as filter cartridges, light bulbs and fuses,

are not covered under this warranty but are warranted to be free from

defects in material and workmanship at the time of the original delivery.

Covers, as supplied by DM Industries, Ltd., are warranted to be free

from manufacturing defects for a period of one (1) year.

Dealer added options are excluded from this warranty and are cov-

ered under separate warranties from their respective manufacturers.

WARRANTY PERFORMANCE

In the event of a defect covered by this warranty, notify your DM

Industries, Ltd., dealer within 10 days of the time the defect is 

discovered. Proof of purchase is required. There is no infield service

warranty. Components such as equipment pump or control center

should be taken or delivered to closest service center. There will be

no charge for service to repair or replacement components within the

first 90 days of purchase. After 90 days, you will be accessed a

minimum service charge of $65.00. Plumbing repairs (leaks) may be

done in-field (at the option of servicing dealer/center). DM Industries,

Ltd., at its sole option, may elect to substitute a spa or component of

equal value, either new or reconditioned, to correct a defect. Such

replacement shall assume, as its warranty, the remaining portion of

the warranty on the original product. If the entire spa needs to be sub-

stituted because the repair is not feasible or the repair can not be per-

formed in the field, reasonable costs to pick up the defective spa and

return it or delivering and installing the replacement spa will be the

responsibility of the spa owner.

EXCLUSIONS

This warranty is void if DM Industries, Ltd., or its representative deter-

mines that the spa has been subjected to any alterations or repairs by

anyone other than an authorized representative of DM Industries, Ltd.

Eco Spas are NOT APPROVED for commercial applications. DM

Industries, Ltd., will not be responsible for the cost of replacement

parts or labor cost of any spa found to be used in a commercial appli-

cation. This warranty shall also be voided if there is evidence that the

spa has been subjected to misuses, abuses, negligence, improper

installation or operations other than in accordance with the instruc-

tions in the owner’s manual, including but not limited to damage to

components caused by improper pH balance or other improper water

chemistry maintenance, (use of chlorine based products other than

dichlorine voids all warranties,) or by failure to maintain and clean the

filtration system; damage to components or spa surface caused by

operating the spa at water temperatures outside the range of 32

degrees F (freezing) and 120 degrees F (excessive heat); damage to

the surface caused by leaving the spa uncovered while empty of

water and in direct exposure to sunlight; damage caused by improp-

er or incorrect electrical hook-up, modifications to internal electrical

assembly boxes and grounding system, by electrical installations

done by anyone other than licensed professionals in non-conformity

with state and local codes or by power surges or spikes; or damage

caused by Acts of God or conditions beyond the control of DM

Industries, Ltd.

DISCLAIMER

Except as expressly provided, there shall be no other warranty or

obligation, expressed or implied, oral or statutory. No dealer or other

person has the authority to make any warranties or representations

covering DM Industries, Ltd., or its products. DM Industries, Ltd., and

its representatives shall not be liable for any injury, loss, cost or other

damage, including but not limited to, loss of use, inconvenience,

costs of removal of a permanent deck, custom fixture, or any other

incidental or consequential costs, expenses or damages. Under no

circumstances shall DM Industries, Ltd., or any of its representatives

be held liable for injury to any person or damage to any property,

however arising. Some states do not allow the exclusion or limitation

of incidental or consequential damages, so the above limitations or

exclusions may not apply to you. This warranty gives you specific

legal rights. You may also have other rights, which vary, from state to

state.

CUSTOMER SERVICE

Contact your dealer or local authorized repair center for service. 

If you do not know who your local dealer is, contact DM Industries,

Ltd.’s Technical Service Division at the address listed below, or call

(305) 685-2063.

This warranty is effective for spas manufactured after January 1, 2005.

Содержание Deluxe U -1 3


























Отзывы: