Two 4 ohm subwoofers connected (2 ohm load)
Four 4 ohm subwoofers connected (1 ohm load)
NOTE!
The amplifier is 1 ohm stable. This means that you
can connect subwoofers in various connections, in
parallel or in series, as long as the resulting
impedance is not less than1 ohm.
If you have subwoofers with dual 4 ohm voice coils,
connect the coils in parallel to get more power from
the amplifier.
7
Speaker wiring RA10
RA10 is a mono amplifier made for use with subwoofers
only. The amplifier has two output connectors. These
are internally connected in parallel and are doubled
for easier connection when you have more than one
subwoofer.
It is not possible to connect in bridge
mode between the speaker terminals
.
The typical setting is around 60 – 80 Hz.
The subsonic filter should be in position
IN
.
LP-filter settings
RA10
+
-
-
+
One 4 ohm subwoofer connected (4 ohm load)
-
+
LP-filter
FREQUENCY
40 125
Hz
+
-
+
-
-
+
-
+
