DU8090Z/DU8190Z DLP Projector Remote Communication Manual
20
CM8X900217EN00
Control key window
This window simulates keys on the remote controller and control panel.
Enter:
Confirm and select function options
Menu:
Press to display OSD menu. Press again to exit it.
Auto:
Run the auto image adjustment function.
Blank:
Pause the image projection, i.e. the projection image is masked. Press again to resume the projection.
Source:
The signal source menu displays. Press to display signal source in the projection screen.
Tools:
Check Crestron equipment for its setup
Info:
Display current projector status and Crestron setup.
Network Setup
This page allows you to configure network setting of the projector.
DHCP
:
The DHCP server of the domain will assign an IP address to the projector automatically
if DHCP is set to On, otherwise network configuration need to be set manually.
IP Address
:
Input the IP address of the projector.
Subnet Mask
:
Configure the subnet mask.
Gateway
:
Configure the gateway
DNS Server
Set the address of DNS server
Save Setting
:
Click the button to confirm the change if any change is made.
Note that current connection is interrupted after change the network settings, please
connect the projector again by new network setting.
