Revision 1.1
10
Specifications
(preliminary)
Storage Temperature
-65°C to + 150°C
Ambient Temperature (Power Applied)
0°C to + 70°C
DC Characteristics ( Ambient Temperature = 0 - 70 Degrees C ) (Preliminary)
Description
Min
Max
Units
Condition
Operating Supply Voltage
4.5
5.25
V
Taken from the PC’s USB Port
Operating Supply Current
70*
mA
Normal Operation
Operating Supply Current
500** uA
USB Suspend
* Current specification does not include current drawn by target electronics via processor port
pins.
** Early versions of the DLP-IO16 boards may not meet the minimum current requirement in
Standby mode.
Please note that no software or documentation is shipped with the DLP-IO16. The latest version
of the drivers, Windows application software and all documentation can be downloaded at any
time from www.dlpdesign.com.
Disclaimer
Neither the whole nor any part of the information contained in, or the product described in this datasheet, may be
adapted or reproduced in any material or electronic form without the prior written consent of the copyright holder.
This product and its documentation are supplied on an as is basis and no warranty as to their suitability for any
particular purpose is either made or implied. DLP Design will not accept any claim for damages howsoever arising
as a result of use or failure of this product. Your statutory rights are not affected.
This product or any variant of it is not intended for use in any medical appliance, device or system in which the
failure of the product might reasonably be expected to result in personal injury.
This document provides preliminary information that may be subject to change without notice.
Contact Information
DLP Design
PO Box 503762
San Diego, CA 92150-3762
Phone: 858-513-2777
Fax: 858-513-2777
Email: [email protected]
Internet:
