DLoG MPC 6, Руководство пользователя

Страница: 26 / 223

Important safety notices
10 Manual DLoG MPC 6
2.5. Exchanging and extending modules
Carefully follow the instructions on opening and closing the device!
Replacement and extension by qualified personnel
The DLoG MPC 6 may only be opened for the purposes of adding or replacing
modules. Only qualified electrical or electronics engineers or persons trained by DLoG
are authorized to do this.
Fuse failure
If, after replacement, the fuse fed by the internal power supplies blows again, the
device must be immediately sent in for servicing.
No battery changes
The DLoG MPC 6 motherboard is powered by a lithium ion battery which is fixed to
the motherboard. This battery should not be replaced under any circumstances, as
this requires soldering! Should a battery replacement be necessary, the device must
be sent to DLoG. Changing the battery yourself will instantly void all present and
future guarantee and liability claims.
Using an unsuitable battery type or incorrectly installing it may
cause the battery to explode.
Extending modules
When extending or replacing modules, only use components approved by DLoG for
use in the DLoG MPC 6. Each time before installing a component, please contact
DLoG to ensure that the desired module can be replaced or installed.
When extending modules, proceed with utmost caution.
Any damage caused while installing or replacing modules will instantly void all present
and future guarantee and liability claims.