9. Mix 30min epoxy with micro
balloon and fill all the space with
sufficient blending, use a knife to
drill the root foam.
10. Apply 30min epoxy on the
root of the wing, use a pice of
tape on the bottom side to
connect 2 panels together
11. Connect 2 panels and place
the wing tips on 2 chairs, the
weight help 2 panels join
together,
wait for curing.
12. Carefully make 2 panels in
correct position, we recommend
using 6.3 degree dihedral, it's
about 82mm high measure from
every tip (not 168mm as show in
this photos while laying other
panel on the desk).
