8
3.5 Put the two chimneys together onto the cooker hood body, meanwhile
adjust the height of the inside chimney into the suitable height, and fix the
inside chimney to the inside chimney bracket by screw. Finally, fix the
body with safety screw. See Pic 5.
Note: The two safety vents are positioned on the back casing, with
diameter of 6mm
(4) NOTICE OF INSTALLATION
1.
Before installation, please ensure the area is clean to avoid
suction of the remaining bits of broken wood and dust.
2.
It cannot share the same air ventilation tube with other
appliance such as gas tube, warmer tube, and hot wind tube.
3.
The bending of ventilation tube should b
e≥
12
0°
, parallel or
above the start point and should be connected to the external
wall.
4.
After installation, make sure that the extractor is level to avoid
grease collection at one end.
