16
If it exceeds 23, key is null and void. If it is equal to
00, then, the
key is null and void.
②
Press the timer key for the 2
nd
time , time segment
, and the last two minute bit segment flash, use
key for the digit increase, and use
key for the digit
decrease. Namely: The variable is 01 each time it is
pressed; the minute segment is with the largest digit of
59. If it exceeds 59, key is null and void. If it is equal
to 00, then, the
key is null and void.
③
Press the timer key for the 3
rd
time, and it is the time
setting exit and confirm key.
④
Long press timer key for 2-3 seconds under this
operation mode, and it is for the hour setting; Press it
for the 2
nd
time: Setting for the minute; Press it for the
3
rd
time: For the time setting exit and confirm, and it
will be repeated again and again (if the 1
st
time pressing
doesn't exceed 2 seconds, then it can't run this operating
procedure.)
2.
The timer key is the timer if the timer key works at either
the position or the indicator.
①
It is provided with three kinds of time segment, and
they are 5min/15min/30min/timer cancel in sequence,
and the 1
st
time is 5min, the 2
nd
time is 15min, the 3
rd
time is 30min, the 4
th
time is timer cancel, the 5
th
time is
5min, and the 6
th
time is 15min …., and it will be
repeated again and again.
②
Example: Let the setting time be 15min, the display is
00:15, 00:14, …00:1, with 0:00 displays per minute,
and once “00: 00” appears, the motor position and the
indicator power supply will be cut off automatically,
(the display screen displays “24-hour system”, the
output is blocked up, and the soot machine enters
standby status, and the backlight will be put out
automatically 30 seconds later.)
③
Time segment change over, 5 seconds later, it starts to
decrease gradually (example: 15min is changed over to
30min, with a delay of 5 seconds, and 00: 30 on the
display screen starts to decrease gradually).
