DKM Motor GEARHEAD, Руководство пользователя

Страница: 16 / 20

4.1 Motor assembly with gearhead
1) Place motor to output shaft directs to up. Choose direction of
gearhead with considering direction of out-coming lead wire.
2) Needs to be careful between motor shaft and gear trails of
inside gearbox during mounting. Turning right and left slightly to
do not crush hardly and make easy of assembling.
3) Use the provided mounting screws for set mounting of gearhead
& motor.
Caution) Gears in gearhead can get damage, like scratches of
chopping during assembling motor and gearhead if forced to be
assembled. Then it can be caused abnormal noise or shorter life
of gearhead.
4.2 Precaution of assembly
· Make holes in mounting plate and use bolts, provided with
gearhead to fix a motor and gearhead on the mounting plate.
Also, be sure there is no-gab between motor flange, gearhead
surface and the mounting surface.
· Use provided bolts to assemble gearhead & motor sets.
Use mounting plate max. 5mm thickness to conclude assembly
properly.
Box Type
Gearhead
Flange Type
Gearhead
4. Installation of Products and Assembly
13