DK2 Power OPT118, Руководство пользователя

Страница: 15 / 65

v.211130 | 15
SAFETY & OPERATION
SAFE PRACTICES & GENERAL INFORMATION
WARNING:
Read this Safety & Operations section before you use the machine.
Become familiar with the operation and service recommendations to ensure the best
performance of your machine.
CAUTION:
This machine is designed solely to trench and must not be used for any
other purpose. It should only be used by trained operators who are familiar with the
content of this manual. It is potentially hazardous to fit or use any parts other than
DK2 OEM parts. The company disclaims all liability for the consequences of such use,
which in addition voids the machine warranty.
NOTICE: BEFORE USING THE UNIT
• Before you dig, have the area verified for any utilities in the ground. Buried electrical lines,
gas lines, etc.
• Pull the unit back, lower the cutting chain to the desired depth, there are multi-levels set by
the hand crank lever.
• Make sure the forward brake is lowered into the wheel brake gears. Loosen the center
bolt in the brake bar to set the FORWARD brake system before digging. This will hold your
trencher from moving forward while digging. The unit will roll free in reverse pull.
• Tighten the bolt to release the dual wheel brakes so your unit will roll freely for
transportation.
• Clear area of all people and property that could be damaged.
• Flying projectiles from operation can cause injury.
• Wear safety glasses, hearing protection, and gloves.
• Do not wear loose fitting clothes that could get stuck in the moving parts of the machine.
• Children should not run this equipment.
• Stay alert of your surroundings and persons that could appear in the area of operation.
• Operators must be fully trained before using this machine.
• User manual is read and understood.
• Machine is positioned on level ground; all guards are fitted and in good condition.
• Expendable components found in your machine are in good working condition. (eg. nuts,
bolts, pins, springs, wiring and switch components, hydraulic hoses, fittings, cutting teeth,
cutting chains, cutting blades, throttles, belts, and tires.) These expendable items ARE NOT
covered under DK2 warranty and can be found on our website at www.detailk2.com.
• All fasteners are checked for tightness.
• Only trenching is performed with this machine.
• Fire extinguisher is available on site.
ENGLISH