DK2 Power OPC506, Инструкция по сборке

Страница: 4 / 29

4
STEP 3
INSTALL AXLE AND TIRES
1.
Remove all hardware from axle.
2.
Install with 4 bolts to machine body.
3.
Install wheels with air stem facing out, then large washer, then nut, then turn by
hand to tighten, back off nut to align hold and insert pin and secure.
4.
Align wheel cap in groove and tap easy with a rubber mallet or a block of wood and
a hammer until seated all around even into the groove.