DK2 Power OPC506, Инструкция по сборке

Страница: 13 / 29

13
OPERATION
BEFORE TURNING KEY AND PULL STARTING ENGINE
CLEAR AREA OF ALL PEOPLE AND PROPERTY THAT COULD BE DAMAGED. THINK
SAFELY. CHIPS ARE FLYING PROJECTILES AND CAN CAUSE INJURY. CHECK BOTH
CHUTES AND MAKE SURE THEY ARE CLOSED AND LOCKED. WEAR SAFETY
GLASSES, HEARING PROTECTION, AND GLOVES.
IF YOUR UNIT WILL NOT START:
1.
Check all white wire connections.
2.
Check key switch is turned to the ON - right hand position.
3.
Also unplug the white connector from key switch and try it.
• Do not wear loose fitting clothes that could get stuck in the chipper.
• Only chip wood, no metal or plastic.
• Children should not run this equipment.
• Stay alert of your surroundings and persons that could appear in the chip path while
you’re working.
• Feed large diameter trees slowly into the cutting drum allowing the drum to regain
RPM and cutting speed between cuts.
RUN ALL CONTENTS IN THE HOPPER THROUGH THE MACHINE BEFORE SHUTTING
ENGINE OFF TO PREVENT LOOSE WOOD FROM LODGING BETWEEN BLADES
JAMMING DRUM BEFORE YOUR NEXT ENGINE START UP. REMOVE SMALL SIDE
COVER WITH 2 NUTS AND TURN DRUM COUNTER-CLOCKWISE TO FREE UP WOOD
STUCK IN THE BLADE.
NEVER RUN CHIPPER WITH CHUTES OPEN. RUNNING A MACHINE WITH CHUTES
OPEN CAN CAUSE INJURY OR DEATH.
READ AND OBEY ALL WARNING LABELS ON THIS MACHINE.
TOW THE MACHINE AT 25MPH MAXIMUM.