aside, it will be re-used.
9. Using medium (blue) thread locker, thread the included set screw ¼” into the L-B
Extension. This “alignment” set screw will go into the alignment hole in the frame during
the installation process. (It does NOT thread into the frame)
10. Repeat steps 1-7 on the left side. Note-If you are also installing the optional Shift Peg
Spacer, please follow the directions for it immediately after removing the floorboard
bracket from the bike frame.
11. Re-install the shift rod bolt and nut that were removed in Step 8 above.
12. Go for a Ride!
General Notes:
● The rider’s safety depends on the correct installation of these Extensions. Please do not
attempt if you have any doubts of your ability to install.
● It is imperative to use blue thread locker and torque specs as specified.
● Installing this Floorboard Extension Kit will result in a changed foot placement, making it
more comfortable. However, Exercise caution as you get accustomed to the
improved/different foot position.
● After installation take an easy test ride, getting accustomed to your new riding position.
Bikes that have been lowered should be especially aware of how fast and how much
they can lean in the turns..
