background image

V-1 SPARK MACHINE Art.No.: 118428 
 

5 / 16

 

A usage of the device which differs from usages which are described in this 
manual can cause damages of the device.  In this case the warranty expires. 
Additional you should notice that every different usage is related with 

dangers and can cause e.g. an electrical short, fire, electric shock or crash.  

2.1.

 

 Overhead installation 

 

 

Danger of life! 
You have to observe the regulations of BGV C1 (formerly VBG 
70) and EN60598-2-17 Installations are to carry out by skilled 

personnel only.

 

The suspension devices have to be build and measured so they can 

withstand for an hour the tenfold of the payload without suffering a 
permanent detrimental deformation. 
Basically installation has to be made by using a second separate suspension. 
This can be e.g. a suitable net. The second suspension must be designed and 
attached so no part of the installation can fall down in case of failure. 
During construction, reconstruction and deconstruction unnecessary stay in 
the range of moving areas, on lightning bridges, under elevated work stations 

or any other danger zones is forbidden. 
The operator is obliged to following safety-related and mechanical facilities:  

 

Before the first start-up or after critical changes before restarting it has 
to be checked by an expert. 

 

Review in the frame of the inspection test at least all four years by an 
expert.  . 

 

Review by a qualified person at least once a year. 

How to carry out the overhead installation: 

Ideally the device should be installed outside lounge areas of people.  

IMPORTANT!

 Overhead installation requires a high level of experience. This 

includes knowledge of calculating the payload, used installation material 
and safety inspections of the used material and the projector whereas the 
required experience is not limited to this. Do not try to carry out installation 
yourself under any circumstances if you are not qualified. Contact a 
professional installer. An inappropriate installation can lead to injuries and/or 
damaged properties. 
It is not allowed to install the device in the grip area of people. 
If the device may hang from the ceiling or from high beams, the use of truss 
systems is mandatory. The device may not be installed so it can swing freely in 
the room. 
Please note: Crashing down items can cause serious injuries! Do not install the 
projector, if you doubt the safety of a possible installation form! 

Содержание V-1

















Отзывы: