djpower TOPCAT H-X3 DMX, Руководство пользователя

Страница: 7 / 12

- 6 -
3.2 AC Plug
The H-X3 comes with a power input cord terminated with a Lockable power connector on one end. The other end is
• CN plug (CN market, etc.)
• EU plug (EU market, etc.)
• US plug (US market, etc.)
If the power input cord that came with your product has no plug, or if you need the change the plug, use the table below to wire
the new plug:
3.3 DMX Linking
You can link the H-X3 to a DMX controller using a 3- or 5-pin DMX connection. If using other DMX-compatible products with
this product, you can control each individually with a single DMX controller. Instructions for connecting and configuring this
product for DMX operation are in the User Manual.
3.4 Mounting
Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes
3.4.1 Orientation
For safety reasons, we do not recommend mounting the product in any capacity. Operate the product while it is flat in a safety
position, and make sure there is adequate room for ventilation, configuration, and maintenance.
3.4.2 Rigging
• Make sure that the structure or surface onto which you are mounting the product can support the product’s weight (see the
Technical Specifications).
• When mounting the product on the floor, make sure that the product and cables are away from people and vehicles.
4 OPERATION
4.1 Preparing for Operation
• After checking that all the parts are intact and complete, position the
machine on flat.
• The Water Level Indicator comes with LED to help check the water
level inside the water tank visually. In addition, the machine
is equipped with fluid sensor, which can detect the water level.
In case it is too low, the unit will stop working automatically and
with “WATER LEVEL LOW” showing in the LCD display.
Connection Wire (U.S.) Wire (Europe)
AC Live Black Brown
AC Neutral White Blue
AC Ground Green/Yellow Green/Yellow