36
OPERATION
The LCD will provide continuous information during the treatments concerning dosage and elapsed time. Parameters are adjusted
using Operator Interface buttons on the front of the unit. The laser light output can be stopped by pressing the PAUSE or STOP
buttons located on the Operator Interface.
To apply laser light therapy, do the following:
1.
Press the Frequency button to select one of the 12 preset frequencies. Press the Up Arrow
button to increase the frequency in 1 Hz increments. Hold the button down to quickly
display higher frequencies. Press the Down Arrow button to decrease the frequency in 1
Hz increments. Hold the button down to quickly display lower frequencies.
An audible tone will be heard when changes are made.
2. Press
the
TIME button and raise or lower treatment time using the up and down arrows.
NOTE:
The Treatment Time and the Dosage are directly correlated. Whenever Treatment
Time is changed, the Dosage is automatically changed and reflected on the
window.
STARTING, STOPPING, AND INTERRUPTING THERAPY
Vectra® Genisys Laser
