©2014 DJI. All Rights Reserved.
1
5
M1
2
3
4
5
6
7
8
M
M
M
M
M
M
M
M1
2
3
4
5
6
7
8
M
M
M
M
M
M
M
Notes
If using a DJI WK-M flight controller, you must use the wires that came with the WK-M. M1 through M6
correspond to each motor number. M7 corresponds to F1 and M8 corresponds to F2 on the WK-M.
M1
2
3
4
5
6
7
8
M
M
M
M
M
M
M
M1
2
3
4
5
6
7
8
M
M
M
M
M
M
M
Connecting main controller and landing gear
1.
Connect left servo cable near M4 to the “RLG” port near M4 on the center frame, then ensure the “RLG”
port near M3 is connected to the “L” port of the landing gear control board.
2.
Connect right servo cable near M7 to the “R” port of the landing gear control board using a servo cable.
3.
For the A2 flight control system, connect the F1 port of the main controller to “IN” port of the landing gear
control board. Other flight control systems connect a 2-position channel receiver to the “IN” port.
