©2014 DJI. All Rights Reserved.
1
4
Notes
(1)
Only mount the IMU in the IMU position of the center frame.
(2)
Mount the GPS with a bracket to avoid interference from the center frame power board.
(3)
Use glue to install the GPS bracket. Ensure it is firm and reliable before every flight.
(4)
Always test motors using the Assistant Software after installation. Refer to the “Flight control system user
manual” for details.
Connecting main controller to center frame
1.
Finish flight control system connection according to the A2 flight control system user manual.
2.
Link connector set (blue) to ESC signal outlet on the center frame then link connector set (blue) to main
controller as shown below.
(1)
Yellow 4-pin cables are for M1~ M4 connections. Yellow cable should be connected to M1.
(2)
Brown 4-pin cables are for M5~ M8 connections. Brown cable should be connected to M5.
(3)
Black 4-pin cables are for four continuous ground pins connections. M1~M4 are connected as the
following diagram shows.
