©2014 DJI Innovations. All Rights Reserved.
57 |
Altitude: Vertical distance from home point.
Speed: Horizontal flying speed.
Distance value will show as N/A if the PHANTOM 2 is not in“Ready to Fly” status.
[5]Wi-Fi Signal Intensity
Indicates camera is connected to your mobile device and Wi-Fi is working normally.
The connection between the camera and mobile device may fail if Wi-Fi signal strength is low. Refer to the
<PHANTOM 2 CONNECTION BROKEN> for more information.
[6]Aircraft Battery Level
(1) When available power is more than 30%, the battery icon is blue (e.g.
). This battery level is
appropriate for flight.
(2) When below 30%, the battery icon will turn red (e.g.
) and the LED flight indicator will slowly blink
red. This battery level is low for flight.It is recommended that fly the aircraft back and land it as soon as
possible.
(3) After available power drops below 15%(e.g.
), there is no longer enough power for flight. The LED
flight indicator will begin to flash red rapidly and the PHANTOM 2 will begin an automatic
descent and land.
The threshold for the first and second level batter low warning can be set in the PHANTOM 2
Assistant Software.
[7]Aircraft GPS Status
GPS status icon display the number of satellites searched by the aircraft. The icon is highlighted when more
than 6 satellites are found that allow the aircraft to enter the “Ready to Fly” mode.
[8] Micro-SDCard Status
DisplaysMicro-SD Card Status. The icon is highlighted when a valid Micro-SD card is inserted. If there is no
Micro-SD card present, it is grayed out.
[9]RemainingShots
Displays estimated shots remaining, based on the current Photo Sizesetting of camera and the storage capacity
of the Micro-SD card. This shows ‘0’ if:
(1) Micro-SD card is not inserted.
(2) Micro-SD card is full.
Содержание PHANTOM 2 VISION PLUS
Страница 14: ... 2014 DJI Innovations All Rights Reserved 43 ...
