dji Mini 2 Скачать руководство пользователя | Manualshive

Страница: 29 / 51

background image

28

©

2021 DJI All Rights Reserved.

Remote Controller

Remote Controller Profile

DJI Mini 2 comes equipped with the DJI RC-N1 remote controller, which boasts DJI’s long-range OcuSync

2.0 transmission technology, offering a maximum transmission range of 6 mi (10 km) and 720p when

displaying video from the aircraft to DJI Fly on your mobile device. Easily control the aircraft and camera

using the onboard buttons. The detachable control sticks make the remote controller easier to store.
In a wide-open area with no electromagnetic interference, OcuSync 2.0 smoothly transmits video links

at up to 720p. The remote controller works at both 2.4 GHz and 5.8 GHz, and will automatically select

the best transmission channel.
OcuSync 2.0 reduces latency to approx. 200 ms by improving the camera performance through the

video decoding algorithm and the wireless link.
The built-in battery has a capacity of 5200 mAh and a maximum run time of 6 hours. The remote

controller charges the mobile device with a charging ability of 500mA@5V. The remote controller

automatically charges Android devices. For iOS devices, first make sure that charging is enabled in

DJI Fly. Charging for iOS devices is disabled by default and needs to be enabled each time the remote

controller is powered on.

Compliance Version: The remote controller is compliant with local regulations.
Control Stick Mode: The control stick mode determines the function of each control stick movement.

Three pre-programmed modes (Mode 1, Mode 2, and Mode 3) are available and custom modes can
be configured in DJI Fly. The default mode is Mode 2.

Using the Remote Controller

Powering On/Off

Press the power button once to check the current battery level. If the battery level is too low, recharge
before use.
Press once, then press again and hold to power the remote controller on or off.

Charging the Battery

Use a USB-C cable to connect the USB charger to the USB-C port of the remote controller. It takes
approx. four hours to fully charge the remote controller.

Controlling the Gimbal and Camera

1. Shutter/Record Button: press once to take a photo or to start or stop recording.
2. Photo/Video Toggle: press once to switch between photo and video mode.

«
...
27
28
29
30
31
...
»

Содержание Mini 2




















































Отзывы:

Нет отзывов

Похожие инструкции для Mini 2

Бренд: Parrot Minidrones Страницы: 2

Бренд: Rage RC Страницы: 12

Бренд: Teal Страницы: 15

Бренд: FIMI Страницы: 24

Бренд: Eavision Robotic Technology Страницы: 67

Бренд: MALA Страницы: 2

Бренд: TDR Страницы: 20

Dragonfly Drone

Бренд: SIMTOO Страницы: 8

Бренд: Selecta Страницы: 36

Бренд: Chemessen Страницы: 17

Бренд: Viewpro Страницы: 27

Бренд: VR PROMARK Страницы: 8

Бренд: MOTA Страницы: 42

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды