dji Mini 2 Скачать руководство пользователя | Manualshive

Страница: 24 / 51

background image

©

2021 DJI All Rights Reserved.

23

DJI Mini 2

User Manual

Charging the Battery

Fully charge the Intelligent Flight Battery before using for the first time.
1. Connect the USB charger to an AC power supply (100-240V, 50/60 Hz). Use a power adapter if

necessary.

2.  Attach the aircraft to the USB charger.
3.  The battery level LEDs display the current battery level during charging.
4.  The Intelligent Flight Battery is fully charged when all the battery level LEDs are on. Detach the USB

charger when the battery is fully charged.

In cold environments, insert the battery into the battery compartment and turn on the aircraft to

warm up before taking off.

The battery cannot be charged if the aircraft is powered on and the aircraft cannot be powered on

during charging.

DO NOT charge an Intelligent Flight Battery immediately after flight as the temperature may be too

high. Wait until it cools down to room temperature before charging again.

The charger stops charging the battery if the battery cell temperature is not within the operating

range of 5° to 40° C (41° to 104° F). The ideal charging temperature is 22° to 28° C (71.6° to 82.4° F).

The Battery Charging Hub (not included) can charge up to three batteries. Visit the official DJI Online

Store for more information about the Battery Charging Hub.

Fully charge the battery at least once every three months to maintain battery health.
If the firmware has been updated to v1.1.0.0 or above, it is recommended to use a QC2.0 or PD2.0

USB charger to charge. DJI does not take any responsibility for damage caused by using a charger
that does not that meet the specified requirements.

When using the DJI 18W USB charger, the charging time is approximately 1 hour and 22 minutes.
It is recommended to discharge the Intelligent Flight Batteries to 30% or lower during transport or

storage. This can be done by flying the aircraft outdoors until the battery level is less than 30%.

to 41° F). It is recommended to hover the aircraft in place for a while to heat the battery. Make sure to
fully charge the battery before takeoff.

2. To ensure the optimal performance of the battery, keep the battery temperature above 20° C (68° F).
3. The reduced battery capacity in low-temperature environments reduces the wind speed resistance

performance of the aircraft. Fly with caution.

4. Fly with extra caution at high sea levels.

«
...
22
23
24
25
26
...
»

Содержание Mini 2




















































Отзывы:

Нет отзывов

Похожие инструкции для Mini 2

Бренд: YUNEEC Страницы: 37

Бренд: Makerfire Страницы: 5

Бренд: Craig Страницы: 12

Бренд: Velleman Страницы: 75

Бренд: DELTA-SPORT Страницы: 126

Бренд: DELTA-SPORT Страницы: 98

Бренд: YUNEEC Страницы: 43

PROFESSIONAL OPM-1 Series

Бренд: O.S. engine Страницы: 2

HVO GO+GO NAKED

Бренд: HIGH VOLUME O2 Страницы: 16

Бренд: Hubsan Страницы: 11

Бренд: DYS Страницы: 7

Бренд: MINDS-I Страницы: 52

Бренд: Helipal Страницы: 16

Бренд: FLYBOTIX Страницы: 16

Бренд: Flyability Страницы: 26

Бренд: Align Страницы: 36

Бренд: Amax Страницы: 8

Бренд: Amax Страницы: 9

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды