DJI FOCUS
User Manual
©
2015 DJI. All Rights Reserved.
7
Quick Focus
Allows rapid switching between four preset focus points.
Assigning a Focus Point
Adjust the lens focus to the desired focus point by turning the focus wheel. Hold down one of
the letters until it blinks to store the focus point. To reassign a focus point, press and hold the
letter to discard its value, and then redo the first step.
Switching to a Focus Point
Press one of the letters to apply its assigned focus point. The OLED screen will display the
active Quick Focus letter. The selected letter will light up and the remaining letters will blink
rapidly. Press the active letter again to exit Quick Focus.
After selecting a Quick Focus button, you can fine tune the focus by turning the focus
wheel without changing its assigned value.
There are mechanical limits on both the focus wheel and lens motor. If the lens does
not respond to the focus wheel, check if the lens has reached its mechanical limit.
Aperture Control
Once aperture control is enabled, the 'D' button is used to switch between focus control and
aperture control.
To switch from focus control to aperture control, press the 'D' button and then follow the
instructions in the DJI GO app to operate the focus wheel.
The remote controller overrides the in-app controls. You will not be able to adjust the
focus , zoom or aperture in the DJI GO app.
Locking the Remote Controller
The remote controller can be locked to avoid unintentional operations. All controls except the
power button and OK button are disabled in the locked state.
