39
38
4
WARNING
!
Failure to reattach the buckle and harness
correctly, can result in serious injury or
death.
1
2
3
4
5
6
Fit loops on harness ends
onto the splitter plate.
5
Removing Seat Pad for Cleaning
Remove harness as
described in the “Belt-
Positioning Booster”
section.
Pull arm covers off arms
and pull through hole in
back of shell.
From back of shell, release
the elastic straps and the 6
harness guides shown in
red.
Remove harness guides by
pushing down on one edge
with one hand and pulling
out from the front side
with the other.
2
3
1
continued on next page.
Thread one end of
harness down through slot
on left side of shell
(1)
,
across bottom of shell
(2)
and up through slot on
right side
(3)
. Be sure
harness adjustment strap
is between shell and
harness strap.
Thread one buckle plate
onto harness from back to
front
(4)
.Thread the
harness retainer
(5)
. Do
the same to the other
harness end. Make sure
the harness is not twisted.
Push harness ends through
upper slots in shell
(6)
.
WARNING
!
Do not use this child restraint without the
seat pad. Failure to do this can result in
serious injury.
4358-3492D Singles 5/27/09 2:19 PM Page 41