DJ-Tech UBM SOLO, Руководство пользователя

Страница: 9 / 28

8
Installation of UBM Studio software
1. Insert the CD into your PC. It will automatically start the installation procedure. If the driver
software does not automatically start, go the CD in the Windows Explorer and double-click on
Setup.exe.
IMPORTANT! For the driver installation, do NOT connect and turn on UBM before the installation! In the
driver install procedure, the installer will alert you when UBM should be connected.
2. Follow the installation instructions in the installer. This will require you to have the UBM Solo
available to install the drivers properly. Connect the UBM Solo to the PC with a USB cable when
instructed to do so by the installer.
IMPORTANT! During the installation process, a window will appear that says the UBM Studio software has not
passed Windows Logo Testing. This is normal and not a problem. Click on “Continue Anyway” and continue
with the software installation.
3. Start UBM Studio if it is not automatically done by the installer. Short-cuts will also be placed on the
Desktop, and in Program Menu –> DJ-Tech –> UBM Studio.
4. A setup screen will appear allowing advanced configuration if needed. Normally, the default
settings should work without modification. This window can be opened at any time from the Option
-> Setup... menu or pressing the F12 key.
* Note that you should always use the same USB port on the PC when using UBM Solo. Changing to a
different USB port will start the hardware discovery and installation process over again, and will
require the software to be reinstalled for the new USB port.