DJ-Tech UBM SOLO, Руководство пользователя

Страница: 12 / 28

11
USING THE VST PLUG-ING
Native Instruments Guitar Combos
Plexi Combo from Native Instruments is bundled with UBM SOLO and is installed and set as the
default VST plug-in for guitar. Demo of AC Box Combo and Twang Combo are also included. The
setup files can be found in folder “Program Files\DJ-Tech\UBMStudio\bundle\”. Please refer to the
Guitar Combos manual for more information. The user manual can be found in “Program Menu –>
Native Instruments Plexi Combo –> Documentation” after the installation of Guitar Combos Plug-ins.
BASiliSk
This is a VST for bass guitar.
- Tuner. A built-in tuner allowing you to tune up. The note display shows the note being played and
the tuning meter shows tuning to +/- 50 cents. It is possible to use the MUTE button in the channel strip
for “silent” tuning.
- Compressor/limiter. This is used to suppress the transients in the bass signal, allowing more gain and
“punch.” The Gate knob sets the threshold when the compressor starts to activate. The Comp knob
adjusts the compression ratio, or how much the signal is “squeezed.”
- EQ. BASiliSk has a 4-band Equalizer to modify the tone of the signal. Knobs are Bass, Mid, Treble and
Presence. The Low Cut button cuts the low frequencies for a “punchier” sound.
- Reverb. The button on the bottom enables or disables the Reverb effect. Dry/Wet knob controls the
balance of reverb and original signal. Time knob sets the delay time for a shorter or longer reverb
sound. The Tone knob controls the tone of the reverb signal.
- Volume. This is the master volume for the signal. For best sound, adjust it so there is no distortion on
the level meter above the knob.
MIChelangelo
This is a VST specially designed for voice.
- Compressor/limiter. This is used to suppress the transients in the mic signal. The Gate knob sets the threshold
when the compressor starts to activate. The Comp knob adjusts the compression ratio, or how much the signal is
“squeezed.”
- EQ. MIChelangelo has a 4-band Equalizer to modify the tone of the signal. Knobs are Bass, Mid, Treble and
Presence. The Low Cut button cuts the low frequencies which are usually nodded so important for human voice.
- Delay. The button on the bottom enables or disables the Delay, or echo effect. Dry/Wet knob controls the balance
of delayed and original signals. Time knob sets the delay time for a shorter or longer delay time. The Feedback
knob controls the number of repeats of the echoes.
- Reverb. The button on the bottom enables or disables the Reverb effect. Dry/Wet knob controls the balance of
reverb and original signal. Time knob sets the delay time for a shorter or longer reverb sound. The Tone knob
controls the tone of the reverb signal.
- Volume. This is the master volume for the signal. For best sound, adjust it so there is no distortion on the level
meter above the knob.