MAIN FEATURES
CONNECTIONS
2
EN
GL
IS
H
DE
UT
SCH
FRAN
ÇA
IS
ES
PAÑ
OL
DUT
CH
IT
A
LI
AN
O
- USB Powered
- 17 MIDI Messages
- 8 Selectable MIDI Channels
- 3 x 45mm Channel Faders and Crossfader
- Adjustable Crossfader Curve
- 2 x Illuminated Push PFL buttons with LED indication.
- 11 x Rotary Knobs
- 2 x columns 10-LED level Meter
- 1 x switch for Master/ PFL Meter selection
- DJ Software for MAC/PC included: DECKADANCE LE
1. Power Connector - Plug in power adaptor here. DC
adaptor can be used when the USB port cannot provide
enough power to the unit. Please use only a 6V DC
adaptor.
2. Power Switch (Adaptor / OFF/ USB power) - Set the
switch to adaptor when using the exclusive adaptor, set to USB bus power when using power
provided from the computer via USB
.
3. USB Socket - Used to connect a computer.
4. C.F Curve Control - Adjusts the shape of the crossfader curve from a quick cut for scratching or to a
longer fade for mixing.
5. MIDI Out - Rotate the MIDIOUT knob to select MIDI channel from 1 to 8. Every time MIDI channel is
changed, the LED level meter will show the MIDI channel number.
1. Install the DJ software from the software CD included. Follow the instruction to finish the installation.
You may need to enter the serial number for the software during installation. The serial number can
be found on the paper pocket of the software CD.
2. Connect the DJM-101 to Computer USB port. Driver will be installed automatically. No Driver is
needed.
You can use the DJM-101 alone or use with other 101 series controllers (including CDJ-101,
VTT-101 and MIX-101) at the same time. Sample connection as below:
VTT-101:
Deck A
MIDI CH1
DJM-101:
Deck A&B
MIDI CH1
CDJ-101:
Deck B
MIDI CH2
MIX-101:
Deck A&B
MIDI CH1
Computer
Powered USB Hub
1
2
3
4
5
OPERATIONS
