26
Double Doors Cutout
Step
1
1
Place the first Appliance Track in-between the Front wall studs near the bottom of the Appliance Track used for the
Slide-In and Drop Cutout by inserting it at an angle and then sliding it into position to align parrallel with the above
Appliance Track. The Appliance Track has been precut to fit the width of the Doors, which should match the width
of the Grill.
Note: Make sure that the smooth side of the Appliance Track is facing down, toward the Double Doors.
Smooth side
toward the
Double Doors
Slide Up
Open side
away from
Double
Doors
Place the second precut Appliance Track between the Perimeter Wall Studs by inserting it at an angle and then
sliding it into position at the bottom of the module. Make sure that the smooth side of the Appliance Track is facing
up, toward the Double Doors.
2
2
Step
Slide
Down
Open side away
from Double
Doors
Smooth side
toward the
Double Doors
Содержание Angela 'L' Island
