Dixon ZTR 2560, Руководство оператора

Страница: 14 / 44

14
S P E C I F I C A T I O N S
Model 2560
CHASSIS: Folded sheet metal and rectangular tube
BODY: Folded sheet metal
SEAT: Designed for operator comfort with suspension system and
padded back and arm rests. Seat is adjustable fore and aft.
MOWER DECK: Deck is made of 10 GA fabricated welded construction with 7
GA reinforcement plates. Three blades combine for a 60" cut
width. Cut height approximately 1.5" to 5" via 10 position lift
handle.
BLADE DRIVE: Electric clutch
DRIVE SYSTEM: Each rear wheel is independently driven by a HydroGear BDP
10A pump and a White CE 14 hydraulic motor.
ENGINE: 25HP Kohler Command, 4-Cycle, V-Configuration, Overhead
Valve, Air-Cooled, Gasoline, Vertical Shaft, Aluminum Head,
and Crankcase with Cast Iron Liners, Full Pressure Lubrication/
Full Flow Filter, Pulse-type Fuel Pump, Fixed Jet Carburetor w/
Smart-Choke, Electronic Ignition, In-Line Fuel Filter, Dual
Element Air Cleaner.
STARTING Electric by key switch operation with safety interlocks on
SYSTEM: parking brake and blade drive clutch.
TIRES: Front 13-5.00x6
Rear 23-9.50x12
RECOMMENDED Front 12 lbs.
TIRE PRESSURE: Rear 12 lbs.
CAPACITIES: Fuel - 11 gallons (approx)
Hydrostat oil system - 4 qt with in-line 40 micron filter
Hydrostat oil recommendation, refer to page 31
Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS: Width 69-1/2"
Height 43"
Length 81”
Weight 916 lbs.
Additional information provided in service instructions under the individual
component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE