Dixon SPDZTR 42, Руководство оператора

Страница: 33 / 64

33
OPeRAtIOn
Manual Transport
When pushing or pulling the mower, engage the eZt
(Integrated Zeroturn transaxle) bypass linkages. the
eZt bypass linkages are located on the rear of the
frame, below the rear engine guard.
Raise the deck into the highest cutting 1.
position.
Pull the eZt bypass linkages up and out of
2.
the keyhole slots. Release the levers with the
head outside the frame and held in the bypass
position.
to reengage the eZt’s to drive, reverse the
3.
above procedure.
8058-150
Bypass linkages
8058-033
eZt engaged 1.
eZt locked in the bypass 2.
Bypass linkage - left hand side
WARNING!
Use extreme caution when loading
the machine into a truck or trailer
using ramps. There is the possibility
of serious injury or death if the
machine falls off the ramps.
1
2
load the machine into truck or trailer by driving up
ramps in low gear. DO nOt lIft! the machine is not
intended to be lifted by hand.