17
dixonvalve.com • 800.789.
1718
Dixon B
5107
Series Butterfly Valves
| IOM
Assembly
– Vertical Canister Actuator
1. For spring return actuators, turn the valve disc to
the desired fail position.
2. Press the position indicator (item 4) onto the
coupler (item 5) so that the bottom of the indicator
is flush with the bottom of the coupler.
NOTE:
the
indicator goes on the side of the coupler with the
square drive. Align the pointer of the indicator with
the position of the valve disc.
3. Slide the coupler/indicator (item 4 & 5) assembly
onto the valve stem.
4. Slide the actuator bracket (item 7) over the valve
body (item 3) and align the bolt holes of the bracket
with the holes in the valve body.
5. Insert the hex head bolts (item 1) through the holes
in the actuator bracket and valve body. Loosely
tighten the bolts.
6. Place the actuator (item 8) onto the actuator
bracket (item 7) and align the shaft of the actuator
with the coupler (item 5). It can only engage one
way.
7. Thread the actuator bolts (item 6) through the bolt
holes in the bracket (item 7) and loosely tighten the
bolts.
8. Tighten the hex head bolts (item 1).
9. Tighten the actuator bolts (item 6).
10.
Install the air fitting(s) and air filter according to the
section of this manual called
Pneumatic
Connections.