Dixon 965882601, Руководство оператора

Страница: 51 / 80

lUBRICATION
dixon
-51
Front Wheel Mount
lubricate with a grease gun, one zerk for each wheel
mount, until the grease is forced out.
Use only good quality bearing grease.
Grease from well-known brand names (petrochemical
companies) usually maintains a good quality.
Front Wheel Bearings
lubricate with a grease gun, one zerk for each set of
wheel bearings, until the grease is forced out.
Use only good quality bearing grease.
8011-731
Lubricating the front wheels
8011-732
Deck spindle
IMPORTANT INFORMATION
Use minimal lubrication and remove
excess lubricant so that is does not come
into contact with belts or belt pulley drive
surfaces.
Deck Spindle
lower the cutting deck completely.
If a grease gun without a rubber hose is used, the foot
plate must be removed.
lubricate with a grease gun, one zerk, 2-3 strokes.
Use only good quality bearing grease.
Deck Outer Spindle
lubricate using a grease gun, one zerk, each side 2-3
strokes. Use only good quality bearing grease.
8061-025
Deck outer spindle (with belt shield removed)