background image

INTROdUCTION

dixon

-5

Congratulations

Thank you for purchasing a dixon ride-on mower. This 

machine is built for superior efficiency to rapidly mow 

primarily large areas. A control panel easily accessible 

to the operator and a hydrostatic transmission 

regulated by steering controls both contribute to the 

machine’s performance.
This manual is a valuable document. Read the 

contents carefully before using or servicing the 

machine. The following of instructions (use, service, 

maintenance, etc.) by all who operate this machine 

is important for the safety of the operator and others. 

It can also considerably increase the life span of the 

machine and increase its resale value.
If you sell your machine, be sure to give the operator’s 

manual to the new owner.

The final chapter of this operator’s manual provides a 

Service Journal. Ensure that service and repair work 

are documented. A well-kept service journal reduces 

service costs for the maintenance and affects the 

machine’s resale value. Please contact your dealer for 

more information. Take the operator’s manual along 

when the machine is taken to your dealer for service.

General

In this operator’s manual, left and right, backward and 

forward are used in relation to the machine’s normal 

driving direction.
Continuous dedication to improve our products require 

that specifications and design are subject to change 

without notice.

Driving and Transport on Public Roads

Check applicable road traffic regulations before 

transporting on public roads. If the machine is 

transported, you must always use approved fastening 

equipment and ensure that the machine is well 

anchored. dO NOT operate this machine on public 

roadways.

Towing

If machine is equipped with a tow hitch, use extreme 

caution when towing. Never allow children or others in 

or on the towed equipment. Make wide turns to avoid 

jack-knifing. Travel slowly and allow extra distance to 

stop. 
do not tow on sloped ground. The weight of the towed 

equipment may cause loss of traction and loss of 

control.
follow the manufacturer's recommendation for weight 

limits for towed equipment. do not tow near ditches, 

canals, and other hazards.

Operating

This machine is constructed only for mowing grass 

on lawns and even ground without obstacles such 

as stones, tree stumps, etc. The machine can also 

be used for other tasks when equipped with special 

accessories provided by the manufacturer. Operating 

instructions for the accessories are provided with 

delivery. All other types of uses are incorrect. The 

manufacturer’s directions concerning operation, 

maintenance, and repairs must be carefully followed.
lawn mowers and all power equipment, can be 

potentially dangerous if used improperly. Safety 

requires good judgement, careful use in accordance 

with these instructions and common sense.
The machine must only be operated, maintained, and 

repaired by persons familiar with the machine’s special 

characteristics and who are also knowledgeable about 

the safety instructions. Use only approved repair parts 

to maintain this machine.
Accident prevention regulations, other general safety 

regulations, occupational safety rules, and traffic 

regulations must be followed without fail.

Unauthorized modifications to the design of the 

machine may absolve the manufacturer from liability 

for any resulting personal injury or property damage.

Содержание 965882601

















































































Отзывы: