Step 3. PLATE REMOVAL:
Using the plate lifter, remove the plate and
bushing from the grinder unit. It is
necessary to lift while pulling on the bushing.
Do not use screwdrivers or other tools to pry
the plate from the grinder unit.
Step 5. REMOVE SPRINGS: Remove the
Belleville springs, 2 each. Some pins have a
spacer collar behind the Belleville springs, if
this collar is used, remove it also.
8
Step 4. KNIFEHOLDER REMOVAL:
Remove the knifeholder from the face of the
grinder. The knife inserts are sharp, so wear
appropriate gloves.
OUTWARD
FACING
SPRING
INWARD
FACING
SPRING
Step 5 continued. The hand is removing the
#2938 springs, notice that these also have one
spring facing inward and one facing out.
Step 6. Remove the #2937 spacer collar.
