Using the ratchet assembly, pushing on the lever, tighten the ring until tight, it does not need
to be so tight that you are about to tip the machine over, just snug. When snug, flip the
ratchet pawl over, and losen the ring 1/8" turn. Return ratchet lever and pawl to the lock
position.
Step 11. Install
Ring. The grinder
ring is heavy. Use
the RL2000 ring
lift if you have one,
or get help to
install the ring.
Once started on the
threads, turn
clockwise until
hand tight.
OFF
ON
Step 10. If you have not already done so, retun the ratchet lever pawl and lever to the locked
postion. This keeps the pawl from getting into your way when putting the ring on.
17
