Figure A
Reservoir Tank
Pump Module
Description
Due to its small size the DiversiTech Mini-Split Pump is easy to use in all ductless systems (ceiling, wall or
floor-standing) with a cooling capacity of 34,000 btu/hr or less. The Mini-Split
®
Pump comes in 2 modules:
• pump module (pump + control circuits)
• tank reservoir (3 level float: Pump shut-down, Pump start-up and alarm.)
Technical Data
Liquid type:
condensate water from mini-split system -
maximum 35°C/95°F
Power Supply
115 V 60 Hz or 230 V 50/60 Hz
Consumption
19 W
Rating
70% duty cycle (ex: 7 sec.ON/3 sec. OFF)
Working temperature
41°F to 113°F - 5°C to 45°C
Storage temperature
37°F to 158°F - 3°C to 70°C
Class
class 1 appliance
Capacity
4 GPH @ zero head, 1.3 GPH @ 20 ft head
Maximum discharge
see Flow Rate Chart
Maximum suction
6.6 ft
Thermal protection
yes – with auto-restart
Ingress Protection
IP64
Noise level
< 21 dBA* at 3.3 ft distance
*= Average level pressure at 3.3 ft, calculated on acoustic power level Lwad = 32.80
dBA (ref 1pw) NF EN Iso 3744 standards
Installation
This pump must not be installed in zones of air circulation.
Alarm and mains connections
Flow (GPH) +10%
Head Height - Ft
.
Flow Rate Chart
The power must be connected to a different source than air unit. Disconnect power before installation.
Only use the supplied cables.
Grey NC
Orange C
Purple NO
Solenoid valve
Compressor
Light alarm
Sound alarm
Green Ground
White Neutral
Black Line
Neutral/Line 2
Line/Line 1
or
and / or
or
