Warranty
All pumps manufactured by or for DiversiTech Corporation (the Company) and sold by the Company under the
DiversiTech brand are warranted to be free of defects in workmanship and materials for a period of 24 months from
date of sale from the distributor to the contractor. The Company will credit, repair or replace, at its option, any Pump
if deemed defective within this time period. All products returned to the Company must include a return authorization
issued by the Company. The returned product should be suitably packaged and shipped prepaid from the point of
shipment to the point designated in the Company’s return authorization.
This warranty is a limited warranty and shall be in lieu of any other warranties, expressed or implied, including, but not
limited to, any implied warranty of merchantability or fitness for a particular purpose. There are no other warranties
that extend beyond the description of the face hereof. The liability of the Company arising out of it’s supply of said
products, or their use shall not in any case exceed the cost of correcting defects in the products as set forth above.
The Company shall not be liable for any costs or damage incurred by its customers in the removal or replacement of
defective products from units in which the products have been assembled. In no event shall the company be liable for
loss of profits, indirect, consequential, or incidental damages.
DOC49689
©2014 DiversiTech Corporation
Diversitech Corporation
6650 Sugarloaf Parkway
Suite 100
Duluth, GA 30097
800.995.2222
FAX 770.953.8600
Mini-Split
®
Pump Recommendations
1. Please read instructions carefully.
3. Acceptable positions for tank reservoir.
Black cap must be fitted on the unused outlet.
6. Position the float magnet upward.
7. Alarm connection:
See wiring diagram
Breaking capacity: 5A Max. (resistive load)
Mains 110-120V - 60 Hz or 220-240V - 50/60Hz
CAUTION!
Never run the pump without water. This can destroy or decrease the pump performance
8. Negative discharge not allowed.
4. Position the vent tube upward.
5. Tighten clamps.
2. Rinse heat exchanger, water tank of the air conditioner with
water.
