ASSEMBLY TEMPLATE
NOTE:
1.
REVISION LEVEL
EMK
11/4/16
CREATED DRAWING
REV.
A
-
DWN
TITLE:
BY:
BY:
APR
DATE:
DWN
APR:
DATE
REVISION:
SCALE:
SHEET:
DRAWING NUMBER:
300 South Krueger Street
Suring, WI 54174
diversifiedwoodcrafts.com
THIS DRAWING IS THE SOLE PROPERTY OF
DIVERSIFIED WOOD CRAFTS. IT MAY NOT
BE ALTERED OR CHANGED WITHOUT
PERMISSION
BY:
APR
APR:
DATE
FORWARD VISION II
FORWARD VISION II
ASSEMBLY INSTRUCTIONS
REV A
5 OF 7
NTS
EMK
11/4/16
NAME
DATE
DESCRIPTION
ECN NO.
UNLESS OTHERWISE SPECIFIED
DIMENSION ARE IN INCHES
STEP 5:
WITH HELP FROM ANOTHER PERSON, STAND WORKSTATION FRAME UP. POSITION FRAME UP TO CABINET, MAKING SURE APRONS
ARE SET IN
1
4
" FROM SIDE OF CABINETS. ATTACH APRON TO CABINET BRACKET ONTO APRON WITH REMAINING SCREWS PROVIDED.
ATTACH BRACKET ONTO BACK OF WORKSTATION BY GOING INSIDE OF THE CABINETS AND PLACING BOLTS THROUGH THE HOLES
PROVIDED IN BACK OF CABINET. INSERT WASHERS, AND NUTS ON OUTSIDE . TIGHTEN NUTS USING A
1
2
" WRENCH OR
1
2
" SOCKET AND
TORQUE WRENCH, TO A MINIMUM OF 12FT LBS BUT NOT TO EXCEED 17FT LBS .
STEP 4:
SLIDE LEG BOOT ONTO LEG WITH
FLARED END TOWARDS BOTTOM
OF LEG. SCREW LEG LEVELER
INTO T-NUT ON BOTTOM OF THE
LEG. REPEAT FOR ALL LEGS. SET
WORKSTATION FRAME ASIDE.
CLOSE UP OF LEG LEVELER AND
LEG BOOT ASSEMBLY
LEG LEVELER
LEG
BOOT
APRON TO CABINET
BRACKET - TYPICAL
RIGHT SIDE OF WORKSTATION SHOWN
STEP 6:
ATTACH ELECTRICAL BOX BRACKET ONTO BOTH SIDES
OF UNIT WITH THE SCREWS PROVIDED. ATTACH COAT
HOOKS IN DESIRED LOCATION ON BOTH SIDES OF UNIT
(NOT SHOWN).
ELECTRICAL
BOX BRACKET
ATTACH WORKSTATION
FRAME FROM INSIDE OF
CABINET HERE
(REPEAT ON OTHER SIDE)
LEFT SIDE OF WORKSTATION SHOWN
WORKSTATION FRAME
FRONT OF WORKSTATION
RIGHT SIDE OF RIGHT CABINET SHOWN
K:\DIVERSIFIED\ASSEMBLY INSTRUCTIONS\ACAD\2944K & 2944KF.dwg, 12/2/2016 11:37:06 AM, DWG To PDF.pc3
