Diversified Optronix DISPLACEMENT FOLLOWER 5100 Скачать руководство пользователя страница 28 | Manualshive

Страница: 28 / 28

Diversified Optronix DISPLACEMENT FOLLOWER 5100 Скачать руководство пользователя страница 28

Displacement Follower User’s Manual

Version 1.4, April 19, 2004

IM1008

Page 26

Appendix

Limited Warranty

Diversified Optronix Corp. (DivOp) warrants that the

Model 5100

will be free from defects in material and workmanship

for a period of one (1) year from the date of purchase. DivOp will, at its discretion, repair or replace any part(s) found to be
defective in the

Model 5100

resulting from defective workmanship, material or both. All costs for packaging and

transportation to Milford, CT, are the responsibility of the customer. DivOp will pay packaging and transportation costs to
the customer for warranty repairs. Please include a copy of the packing slip or invoice identifying all returned material along
with details of the problem or symptoms you are experiencing with Product.

Before you return any items

, please call or

email for instructions and authorization. Some problems can be resolved without any need for shipping the equipment.

There is no other Warranty express or implied. This warranty does not apply to any defect, failure or damage caused by
improper use or storage of Product. DivOp will not be obliged to provide warranty service for units that have been: 1)
damaged from improper use or interconnection to external equipment; 2) modified or tampered with or 3) improperly stored
or exposed to the elements.

Customer Service

Technical support and service is available from 9:00 AM to 4:30 PM, M-F, EST.

(203) 878-9540

(203) 878-9628 Fax

[email protected]

www.divop.com

Address materials to:

Diversified Optronix Corp.

116 Quirk Road

Milford, CT 06460

Copyright



1999 2004 Diversified Optronix Corp.

All rights reserved.

This publication and the information provided are subject to change, errors and omissions.

«
...
26
27
28

Содержание DISPLACEMENT FOLLOWER 5100





























Отзывы:

Нет отзывов