49
I25
I24
I23
I22
I21
I20
tr
sv
pt
pl
no
it
fr
fi
es
en
de
da
cz
cn
Cleaning the tool
Removing and cleaning the squeegee
Cleaning the vacuum hose
Cleaning the water distributor
Cleaning the machine
Storage / parking of machine (machine is idle)
Service, maintenance and care
The machine's maintenance is a pre-condition for trouble-free running and a
long life.
• Switch the machine off.
• Stand the machine on the parking support.
• Remove the brush holder (2) by screwing off the
triangular handle (1).
• Pull the brush from the brush housing.
• Clean the tools under running water.
• Switch the machine off.
• Stand the machine on the parking support.
• Remove the squeegee by turning the locking
screws.
• Clean the squeegee under running water using
a brush.
An optimal vacuuming result can only be achieved with clean and
intact blades!
• Switch the machine off.
• Stand the machine on the parking support.
• Open the tank lid.
• Remove the recovery tank and the squeegee.
• Pull the suction hose out of the holder in the
vertical position.
• Clean the suction hose with running water so
that soiling will be flushed out.
The suction hose is not marked in yellow, but it is nevertheless
important that it should be cleaned after every ending of the
cleaning operation.
This will prevent any blockage of the suction hose.
• Switch the machine off.
• Stand the machine on the parking support.
• Open the tank lid.
• Remove the recovery tank.
2
1
• Remove the hoses from the cover.
• Remove the cover (1) and the water
distributor (2).
• Clean the cover (1) and the water distributor (2)
under running water.
Caution:
Never clean the machine with high water pressure or a
water hose.
The ingress of water into the machine might cause considerable
damage to mechanical or electrical parts.
• Wipe down the machine with a damp cloth.
We recommend disconnecting the battery from the machine using
the battery disconnection socket when stroring / parking the
machine.
Store the machine on the parking support and
with the tank lid open. The tank can thereby dry
out completely. The formation of moulds and
unpleasant smells can thereby be reduced.
Caution:
Never store the machine for a longer period with a discharged
battery. The battery could be damaged by this, and may no longer
be functional.
Caution:
Only TASKI branded spare parts must be used, otherwise
warranties and liabilities will be omitted!
Symbols:
= After use,
= Every week,
= Every month,
⊗
= Service light
Activity
⊗
page
Recharge batteries
45
Clean all parts marked yellow
48
Drain and clean the tanks
48
Clean the machine with a damp cloth
49
Clean the tank lid seal, check for cracks and re-
place if necessary
Maintenance programs by TASKI service made by
TASKI technician
X
1
2