Dive Perfect Stubby LED-1500 User Manual
Rev 1.1, 18-Jun-2014
Page
4
of
4
7. Flooding
In the unlikely event your dive light leaks or is
flooded, immediately remove the batteries. Flush
all parts with fresh water and allow it to dry
thoroughly. Check for all possible cause of
leakage and the correct problem if possible.
Return the dive light for repair if necessary. Do
not use batteries that have been wet. Batteries
from a flooded dive light should be discarded.
MANUFACTURER WARRANTY
1 Year Limited (Australia/USA/Canada only).
Conditions may vary with your area, region,
territory or country. For details, refer to the
Product Warranty section on the Dive Perfect web
site, or contact your local distributor or dive shop.
SERVICE
Please refer to the Dive Perfect Australia web site
at
issues with your Dive Perfect Stubby LED-1500
Dive Light; or for immediate assistance
call +61 3 5985 3322, or
RETURN POLICY
If your dive light fails to operate please contact
Dive Perfect customer service on
+61 3 5985 3322 for assistance.
If your dive light needs to be returned to us, we
will give you a RMA#. You should then send your
dive light, without batteries, for repair or
replacement to:
Dive Perfect Australia
1/49 Peninsula Ave
RYE VIC 3941
Australia
No warranty returns will be accepted without a
RMA#. Postage due and freight collect item will
not be accepted.
COPYRIGHT NOTICE
This User Manual is copyrighted by Dive Perfect
Australia. All rights are reserved. It may not, in
whole or in part, be copied, photocopied,
reproduced, translated, or reduced to any
electronic medium or machine readable format
without prior consent in writing from Dive Perfect.
TRADEMARK NOTICE
Dive Perfect and the Dive Perfect logo are
registered or unregistered trademarks of Dive
Perfect Australia. All rights are reserved.
WARNING
Diving is an adventure sport and should not be
undertaken without receiving the necessary
training from a recognised training agency.
