Installation Instruction
JVT Series LED Vapor Tight Jelly Jar
IMPORTANT
READ CAREFULLY BEFORE INSTALLING THE FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE
REFERENCE.
THOROUGHLY INSPECT THE FIXTURE FOR ANY FREIGHT DAMAGE; FREIGHT DAMAGE SHOULD BE
REPORTED TO THE DELIVERY CARRIER.
The fixtures must be wired in accordance with the National Electrical Code and all applicable local codes. Proper
grounding is required for safety.
This product MUST be installed in accordance with the applicable installation code by a person familiar with the
construction and operation of the product.
This product SHALL be surface mounted with junction box or non-combustible surface above 4 feet (1.2 meter) high.
User should prepare necessary accessories and spare parts (not provided) including junction box and screws.
This luminaire is designed for outdoor lighting applications with ambient temperatures not exceeding 40°C.
WARNING
RISK OF ELECTRIC SHOCK. Make sure power supply is OFF before installing or maintaining fixture. No user
serviceable parts inside.
Never perform maintenance or cleaning while fixture is energized. Disconnect power and allow fixture to cool before
maintaining. A regularly scheduled maintenance program should be established to retain optimum light output and
reduce heat retention. Dusting with a soft, clean, dry cloth is normally sufficient for the optical system. Any
accumulation of dust or dirt should be removed regularly.
Dangerous voltage exists within the unit and all precautions usually observed in handling high voltage equipment
should be observed when replacing light engine or otherwise servicing luminaires. Disregarding this warning could
result in electrical
shock and possible injury to the individual installing or servicing this equipment.
WALL MOUNT
Mounting
Housing
LED
Housing
Gasket
Globe
Guard
Mounting
Housing
LED
Housing
Gasket
Globe
Guard
CEILING/ PENDENT MOUNT